Inverto Programmerer

Inverto Unicable II programmeringsenhet

PrisNOK1 799,00 inkl. mva.

Produktinfo

Inverto Unicable II programmeringsenhet

Til bruk med multiswitch fra Inverto.

Denne benyttes programmering av switchen som nevnt over. Du kan bla programmere enheten å hente ned enkelte transpondere. Du kan ta imot opp til 32 transpondere og distribuere disse til en ubegrenset mengde mottakere.

Enheten benytter egen programvare på PC- dette kan lastes ned her.

Ønsker du flere detaljer om enheten finnes de her.

Bruksanvisningen kan lastes ned ved å trykke på denne lenken.

Teknisk:

Interfaces

 

 

1x Satellite IF, F-type

1x Satellite IF loop-through out, F-type

1x USB (Type-B)

Loop-through loss 1dB max.

Control protocols:

 

DiSEqC™ commands extension according to CENELEC EN50494     and/or EN50607, DiSEqC2.0.
Display and keys

Activity LED

 

Yellow blinking:  Communication activity between ODU and Programmer

Green: Configuration files in ODU and Programmer are identical

Power LED

 

Red: The Programmer is powered over the USB connection

Orange: The Programmer is powered over the 12V DC input

Button

 

 

 

Short press: Transmit a configuration file stored in the Programmer to the ODU device

Long press: Download the configuration file of the ODU and compare to a file stored in the Programmer 

Power consumption
Programmer only 5VDC, 50mA (can be powered over the USB interface)

ODU power

 

13V-18V, 600mA max. - powering and programming of an ODU device requires use of the supplied AC/DC adapter
Dimensions 107mm x 77mm x 30 (W x D x H)

AC/DC adapter

 

 

 

 

 

 

Input voltage: 100-240VAC, 50/60Hz, 0.8A max. 

Output voltage: 12VDC

Output current: 2A 

Short circuit protection: Yes

Low Voltage Directive (2014/35/EU)

Electromagnetic Compatibility Directive (2014/30/EU)

Eco-Design Directive (2009/125/EC)